Filter by attributes
  • Connection
  • Specification
  • Connector Color
  • Bluetooth
  • Operating System

Adapter Firmware

Update the Firmware on your Adapter. You can view all the Firmware changes on the BlueFire Forum.

Note, the Adapter is not Truck ELD compliant and the BlueFire App no longer supports the Federal Electronic Data Logging requirements.

To update your Firmware you need to send it in for updating by ordering the update from this page or from the 'Update the Adapter Firmware' button at the bottom of this page.

Updating your Firmware will also upgrade a 3.1 Adapter to the new 4.1 hardware. See here for the 4.1 upgrade changes.

It is highly recommended that you update your Firmware as future App versions will no longer support older Firmware versions. Plus the 4.1 hardware upgrade greatly improves the Adapter connection.

Note, if you have a 4.1 hardware Adapter or a Bluetooth Classic (2.1) Adapter you can download and update the Firmware yourself with a Windows computer from this link. See the Getting Started document's Firmware Update section for more information.

Very Important Note - Upgrading to the new 4.1 hardware changes the App Setting 'Connect to Last Adapter' so if you are using this option, after you receive your updated Adapter, you need to uncheck that setting, connect to the Adapter and then re-check the setting.

Along with sending us your Adapter you also need to include a copy of the update order. 

Send your Adapter along with a copy of this order to the address below and we will update the firmware and ship the Adapter back to you according to your order shipping.

DO NOT Send any Adapter 6-pin or ALDL Connectors, just send the Adapter by itself.

BlueFire LLC
20250 276th Ave SE
Unit 264
Hobart, WA 98025-5012

Note, this is a PO Box and we check it every afternoon at the end of the day.

Update the Adapter Hardware/Firmware

Note, this update now includes the 4.1 hardware upgrade for 3.1 BLE adapters. This upgrade has significant improvements over the 3.1 version but you need to send your Adapter in to get the initial upgrade. Once your Adapter is upgraded, you can use the Firmware Update program for future updates. The Firmware and Hardware changes can be found at this link.


Very Important Note, the 4.1 hardware upgrade changes the App Setting 'Connect to Last Adapter' so if you are using this option, after you receive your updated Adapter, you need to uncheck that setting, connect to the Adapter and then re-check the setting.


Send your Adapter along with a copy of this order to the address below and we will update the firmware and ship the Adapter back to you according to your order shipping.

DO NOT Send any Adapter 6-pin or ALDL Connectors, just send the Adapter by itself.


BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

Note, this is a PO Box and we check it every afternoon at the end of the day.


$20.00