PressurePro Pulse 9-Pin Cable

9-Pin J1939 data cable for connecting the PressurePro Pulse (not the Pulse FX) to a 9-Pin Y-Cable. This is a data cable only. Your Pulse must be powered externally.

Important Note - This is for the PressurePro Pulse, NOT the Pulse FX.

Note that lead time is 2-3 weeks not including shipping and is not returnable.

This cable is 3 feet in length. If you need a longer length, you can get this 9-Pin Extension cable.

You will also need a 9-Pin Y Cable to connect both the Pulse and our Adapter to your diagnostic port.

Note that the Pulse is primarily used to configure your TPMS tire configuration and send tire data to the BlueFire App. So it does not necessarily need to be on your dash.

$70.00

Qty:

Products specifications

Attribute name	Attribute value
Connection	9 Pin
Specification	J1939
TPMS	Pressure Pro

Product tags

J1939 (14)
,
9 Pin (14)
,
TPMS (2)
,
Pressure Pro (2)

Customers who bought this item also bought

9-Pin J1939/J1708 Green Bluetooth LE Adapter for Apple, Android and Windows

9-Pin Adapter for heavy duty vehicles circa early 2000's to the present.

Note, you must have a compatible diagnostic port to use this Adapter. See the Getting Started document for more info on diagnostic ports.

If you do not have a 9-pin diagnostic port, you can use this Adapter along with a converter cable. See this link for more info on converter cables.

The Adapter comes with the latest firmware and hardware. You do not need to order the firmware update.

Note, the Adapter is not a Truck ELD (Electronic Logging Device) and does not support the Federal Electronic Data Logging requirements.

Important Note, the Adapter is only for 12 volt diagnostic ports. Plugging it into a 24v source will damage the Adapter resulting in an expensive repair.

$240.00